The SED5MMFHYML 5 micron filter is a Proprietary product designed exclusively for the Microline filter housings, and with some Proprietary filter products the consumer compromises the Purity and Safety of their drinking water because of performance limitations associated with the size, design, and choice of material used in manufacturing the filter. This filter uses Conventional Core, Micro-Fiber technology to remove Dirt, Rocks, Sand, Sticks, Bugs, and other large debris from untreated water. This filter is manufactured by thermally fusing thousands of small micro fibers together. This filter becomes easily saturated and fouled under excessive Sediment input, and requires more frequent service intervals and cartridge replacement. Cysts, Bacteria, and Super Fine Silt, Clay, and Debris WILL NOT be removed by this filter and will be passed on to the Membrane Filter when used as a Pre-filter in a Reverse Osmosis System, which would eventually result in premature Membrane failure.

Recommended Service Interval on Most Water Supplies: 3 years

SED5MMFHYML - Substitute Sediment Pre-Filter for Hydrotech Part # 41400008

The CF5MCBHYML 5 micron filter is a Proprietary product designed exclusively for the Microline filter housings, and with some Proprietary filter products the consumer compromises the Purity and Safety of their drinking water because of performance limitations associated with the size, design, and choice of material used in manufacturing the filter. This filter uses Extruded Carbon Block Technology to reduce or remove Chlorine, Hydro-Carbon Gases, Sediments and other debris from untreated water. Small granules of Bituminous Carbon are crushed and molded into long solid Blocks of Carbon and then cut to specific lengths. Ammonia, Chloramines, VOC’s, Silt, Clay, and Bacteria pass through this filter because of the Carbon used and larger micron rating. This filter provides reasonable protection against Chlorine and Hydro-Carbon Gas contaminants when used in a Reverse Osmosis Drinking Water System as either a Membrane Pre-filter or Storage Tank Post-filter.

Recommended Service Interval on Most Water Supplies: 3 years

CF5MCBHYML - Substitute Carbon Block Pre-Filter for Hydrotech Part # 41400009, 41400011

The MEM15TFCHYML .001 micron Membrane filter is a Proprietary product designed exclusively for the Microline filter housings, and with some Proprietary filter products the consumer compromises the Purity and Safety of their drinking water because of performance limitations associated with the size, design, and choice of material used in manufacturing the filter. This Membrane uses a Thin Film Composite Cellular Skin to separate and remove Dissolved Solids, Salts, Minerals, Heavy Metals, Organic Matter, Pyroxene’s, Sub-micron Colloidal matter, Cysts, Bacteria, and other contaminants from untreated water. The TFC Membrane skin has a broader PH tolerance, can remove a higher maximum threshold of dissolved solids, and removes a higher percentage of dissolved solids than the CTA Membrane is capable of removing. The TFC Membrane can be used on Municipal or Well Water with proper pre-filtration. Typical Rejection of minerals and impurities for the TFC Membrane is 95%-99% removal, compared to 70%-80% for the CTA Membrane.

Recommended Service Interval on Most Water Supplies: 3 years

MEM9TFCHYML (9 gpd), MEM15TFCHYML (15 gpd), MEM25TFCHYML (25 gpd), MEM35TFCHYML (35 gpd), MEM45TFCHYML (45 gpd) Substitute Membrane Filter for Hydrotech Part # (9 gpd): 41400003 (15 gpd): 41400004 (25 gpd): 41400005 (35 gpd): 41400006 (45 gpd): 41400007 (must use with CF5MCBHYML Carbon Block Pre-Filter)

The CF5MCBHYML 5 micron filter is a Proprietary product designed exclusively for the Microline filter housings, and with some Proprietary filter products the consumer compromises the Purity and Safety of their drinking water because of performance limitations associated with the size, design, and choice of material used in manufacturing the filter. This filter uses Extruded Carbon Block Technology to reduce or remove Chlorine, Hydro-Carbon Gases, Sediments and other debris from untreated water. Small granules of Bituminous Carbon are crushed and molded into long solid Blocks of Carbon and then cut to specific lengths. Ammonia, Chloramines, VOC’s, Silt, Clay, and Bacteria pass through this filter because of the Carbon used and larger micron rating. This filter provides reasonable protection against Chlorine and Hydro-Carbon Gas contaminants when used in a Reverse Osmosis Drinking Water System as either a Membrane Pre-filter or Storage Tank Post-filter.

Recommended Service Interval on Most Water Supplies: 3 years

CF5MCBHYML - Substitute Carbon Block Post-Filter for Hydrotech Part # 41400009, 41400011

The CF5MCBHYML 5 micron filter is a Proprietary product designed exclusively for the Microline filter housings, and with some Proprietary filter products the consumer compromises the Purity and Safety of their drinking water because of performance limitations associated with the size, design, and choice of material used in manufacturing the filter. This filter uses Extruded Carbon Block Technology to reduce or remove Chlorine, Hydro-Carbon Gases, Sediments and other debris from untreated water. Small granules of Bituminous Carbon are crushed and molded into long solid Blocks of Carbon and then cut to specific lengths. Ammonia, Chloramines, VOC’s, Silt, Clay, and Bacteria pass through this filter because of the Carbon used and larger micron rating. This filter provides reasonable protection against Chlorine and Hydro-Carbon Gas contaminants when used in a Reverse Osmosis Drinking Water System as either a Membrane Pre-filter or Storage Tank Post-filter.

Recommended Service Interval on Most Water Supplies: 3 years

CF5MCBHYML - Substitute Sediment/Carbon Pre-Filter for Hydrotech Part # 41400008 (must use with  MEM9TFCHYML, MEM15TFCHYML, MEM25TFCHYML, MEM35TFCHYML, MEM45TFCHYML Membrane Filter) > 9 - 45 gpd membranes available

The MEM9TFCHYML, MEM15TFCHYML, MEM25TFCHYML, MEM35TFCHYML, MEM45TFCHYML .001 micron Membrane filter is a Proprietary product designed exclusively for the Microline filter housings, and with some Proprietary filter products the consumer compromises the Purity and Safety of their drinking water because of performance limitations associated with the size, design, and choice of material used in manufacturing the filter. This Membrane uses a Thin Film Composite Cellular Skin to separate and remove Dissolved Solids, Salts, Minerals, Heavy Metals, Organic Matter, Pyroxene’s, Sub-micron Colloidal matter, Cysts, Bacteria, and other contaminants from untreated water. The TFC Membrane skin has a broader PH tolerance, can remove a higher maximum threshold of dissolved solids, and removes a higher percentage of dissolved solids than the CTA Membrane is capable of removing. The TFC Membrane can be used on Municipal or Well Water with proper pre-filtration. Typical Rejection of minerals and impurities for the TFC Membrane is 95%-99% removal, compared to 70%-80% for the CTA Membrane.

Recommended Service Interval on Most Water Supplies: 3 years

MEM9TFCHYML (9 gpd), MEM15TFCHYML (15 gpd), MEM25TFCHYML (25 gpd), MEM35TFCHYML (35 gpd), MEM45TFCHYML (45 gpd) Substitute Membrane Filter for Hydrotech Part # (9 gpd): 41400003 (15 gpd): 41400004 (25 gpd): 41400005 (35 gpd): 41400006 (45 gpd): 41400007 (must use with CF5MCBHYML Carbon Block Pre-Filter)

The CF5MCBHYML 5 micron filter is a Proprietary product designed exclusively for the Microline filter housings, and with some Proprietary filter products the consumer compromises the Purity and Safety of their drinking water because of performance limitations associated with the size, design, and choice of material used in manufacturing the filter. This filter uses Extruded Carbon Block Technology to reduce or remove Chlorine, Hydro-Carbon Gases, Sediments and other debris from untreated water. Small granules of Bituminous Carbon are crushed and molded into long solid Blocks of Carbon and then cut to specific lengths. Ammonia, Chloramines, VOC’s, Silt, Clay, and Bacteria pass through this filter because of the Carbon used and larger micron rating. This filter provides reasonable protection against Chlorine and Hydro-Carbon Gas contaminants when used in a Reverse Osmosis Drinking Water System as either a Membrane Pre-filter or Storage Tank Post-filter.

Recommended Service Interval on Most Water Supplies: 3 years

CF5MCBHYML - Substitute Carbon Block Post-Filter for Hydrotech Part # 41400009, 41400011