►.001 mic. size for Removal of Salts, Hardness, Minerals, & Metals
►Up To 2000 PPM and 99% Rejection of Total Dissolved Solids
►Up To 150 gallons per day of Purified Water Production

The DPF1MIMFPTQ 1 micron filter uses a Graded Density Core, Carbon Impregnated Micro-Fiber Technology encapsulated inside of a Proprietary Plastic Housing to reduce or remove  Dirt, Iron, Sand, Sediment, Silt, Clay, Cysts, Bacteria, Chlorine, Ammonia, Chloramines, Hydro-Carbon Gases, and other fine debris from untreated water. Similar to the DPF1/2MIMF Filter, Coconut Shell Carbon Powder is impregnated into thousands of small Micro Fibers that are thermally fused together creating a Modified Carbon Block Filter. The filter material becomes extremely dense in material weight from the outer perimeter to the center core providing Graduated Depth filtration and allowing more retention of Silt, Clay, and Bacteria to be trapped in the inner core, extending the service interval between changing. This filter is only outperformed by the 1/2 micron DPF1/2MIMF Dual-Purpose filter. The 1 micron Density and Carbon Powder offers next to the best removal of Chlorine, Hydro-Carbon Gases, Sediments, Cysts, and Bacteria when used as a Pre-filter for a Reverse Osmosis Drinking Water System,  and Superior Pre-Filtration for Beverage Dispensers, Ice Machines, Coffee Machines, Distillers, Fountains, Refrigerators, and other appliances. The Proprietary design restricts the consumer to only one choice of filter cartridge selection and one distribution entity when replacing expired or exhausted filters, which typically imposes a higher retail price and compromise in quality and performance.

Recommended Service Interval on Most Water Supplies: 3 years

DPF1MIMFPTQ - Substitute Sediment/Carbon Pre-Filter for PuROTwist Part # Q5605, Q5606, Q5633, Q5640, Q5621

The MEM15TFCPTQ, MEM35TFCPTQ, MEM50TFCPTQ .001 micron Membrane filter uses a Thin Film Composite Cellular Skin encapsulated inside of a Proprietary Plastic Housing to separate and remove Dissolved Solids, Salts, Minerals, Heavy Metals, Organic Matter, Pyroxene’s, Sub-micron Colloidal matter, Cysts, Bacteria, and other contaminants from untreated water. Water containing Dissolved Minerals and other Contaminants is forced under high pressure through a Semi-Permeable, Spiral Wound, Thin Film Composite Cellular Skin layered in several wrappings, to separate and rinse away the dissolved solids to a sewage drain, leaving only the Pure, H20 water molecules for consumption, production, processing, or manufacturing. The TFC Membrane can be used on Municipal or Well Water with proper pre-filtration. The Proprietary design restricts the consumer to only one choice of filter cartridge selection and one distribution entity when replacing expired or exhausted membranes, which typically imposes a higher retail price by forcing the consumer to purchase a Membrane Vessel with Check Valve and Flow Restrictor, in addition to the Membrane Filter with every Membrane replacement. Typical Rejection of minerals and impurities for the TFC Membrane is 95%-99% removal, compared to 70%-80% for the CTA Membrane.

Recommended Service Interval on Most Water Supplies: 3 years

►.001 mic. size for Removal of Salts, Hardness, Minerals, & Metals
►Up To 2000 PPM and 99% Rejection of Total Dissolved Solids
►Up To 150 gallons per day of Purified Water Production

MEM15TFCPTQ (15-18 gpd), MEM35TFCPTQ (35 gpd), MEM50TFCPTQ (50 gpd) -  Substitute Membrane Filter for PuROTwist Part # TQ56-15FC (15-18 gpd), TQ56-35FC (35 gpd), TQ56-50FC (50 gpd)

The CF1MCBPTQ 1 micron filter uses Solid Pressed Molded Carbon Block Technology encapsulated inside of a Proprietary Plastic Housing to reduce or remove Cysts, Bacteria, Chlorine, Ammonia, Chloramines, Hydro-Carbon Gases, VOC’s, Fine Sediments, Silt, and Clay from untreated water. Small granules of Coconut Shell Carbon are Crushed into Powder, Pressed and Bonded together with a “PATENED” heat molding process to form a solid BLOCK of Carbon. The Block Density provides 2-10 times more Volume Weight of Filter Material when compared to other Carbon Filters. This filter provides next to the best protection against VOC’s, Hydro-Carbon Gases, Silt, Clay, Cyst and Bacteria Contaminants when used in Reverse Osmosis Systems, Beverage Dispensers, Ice Machines, Coffee Machines, Distillers, Fountains, Refrigerators, and other appliances. This filter utilizes a Proprietary design which restricts the consumer to only one choice of filter cartridge selection and one distribution entity when replacing expired or exhausted filters, which typically imposes a higher retail price and compromise in quality and performance.

Recommended Service Interval on Most Water Supplies: 3 years

►.001 mic. size for Removal of Salts, Hardness, Minerals, & Metals
►Up To 2000 PPM and 99% Rejection of Total Dissolved Solids
►Up To 150 gallons per day of Purified Water Production

CF1MCBPTQ - Substitute Carbon Post-Filter for PuROTwist Part # Q5620, Q5633, Q5640, Q5621, Q5615

The SED5MMFPTQ 5 micron filter uses Conventional Core,  Micro-Fiber Technology encapsulated inside of a Proprietary Plastic Housing to remove Dirt, Rocks, Sand, Sticks, Bugs and other larger debris from untreated water. This 5 micron filter is manufactured by thermally fusing thousands of small polypropylene micro fibers together. Smaller particles, Bacteria, and super fine debris pass through this filter because of the inefficient design and larger micron rating. This filter is better suited for Bath, Kitchen, Bar, or Island Sink Faucets and Shower Heads where larger debris plugs the faucet screen, as Pre-Filter for a multistage Reverse Osmosis system, or as a Pre-filter for Spas, Tubs, Tanks, Drums, etc. The Proprietary design restricts the consumer to only one choice of filter cartridge selection and one distribution entity when replacing expired or exhausted filters, which typically imposes a higher retail price and compromise in quality and performance.

Recommended Service Interval on Most Water Supplies: 3 years

►.001 mic. size for Removal of Salts, Hardness, Minerals, & Metals
►Up To 2000 PPM and 99% Rejection of Total Dissolved Solids
►Up To 150 gallons per day of Purified Water Production

SED5MMFPTQ - Substitute Sediment Pre-Filter for PuROTwist Part # Q5605

The DPF1MIMFPTQ 1 micron filter uses a Graded Density Core, Carbon Impregnated Micro-Fiber Technology encapsulated inside of a Proprietary Plastic Housing to reduce or remove  Dirt, Iron, Sand, Sediment, Silt, Clay, Cysts, Bacteria, Chlorine, Ammonia, Chloramines, Hydro-Carbon Gases, and other fine debris from untreated water. Similar to the DPF1/2MIMF Filter, Coconut Shell Carbon Powder is impregnated into thousands of small Micro Fibers that are thermally fused together creating a Modified Carbon Block Filter. The filter material becomes extremely dense in material weight from the outer perimeter to the center core providing Graduated Depth filtration and allowing more retention of Silt, Clay, and Bacteria to be trapped in the inner core, extending the service interval between changing. This filter is only outperformed by the 1/2 micron DPF1/2MIMF Dual-Purpose filter. The 1 micron Density and Carbon Powder offers next to the best removal of Chlorine, Hydro-Carbon Gases, Sediments, Cysts, and Bacteria when used as a Pre-filter for a Reverse Osmosis Drinking Water System,  and Superior Pre-Filtration for Beverage Dispensers, Ice Machines, Coffee Machines, Distillers, Fountains, Refrigerators, and other appliances. The Proprietary design restricts the consumer to only one choice of filter cartridge selection and one distribution entity when replacing expired or exhausted filters, which typically imposes a higher retail price and compromise in quality and performance.

Recommended Service Interval on Most Water Supplies: 3 years

►.001 mic. size for Removal of Salts, Hardness, Minerals, & Metals
►Up To 2000 PPM and 99% Rejection of Total Dissolved Solids
►Up To 150 gallons per day of Purified Water Production

DPF1MIMFPTQ - Substitute Sediment/Carbon Pre-Filter for PuROTwist Part # Q5605, Q5606, Q5633, Q5640, Q5621

The MEM15TFCPTQ, MEM35TFCPTQ, MEM50TFCPTQ .001 micron Membrane filter uses a Thin Film Composite Cellular Skin encapsulated inside of a Proprietary Plastic Housing to separate and remove Dissolved Solids, Salts, Minerals, Heavy Metals, Organic Matter, Pyroxene’s, Sub-micron Colloidal matter, Cysts, Bacteria, and other contaminants from untreated water. Water containing Dissolved Minerals and other Contaminants is forced under high pressure through a Semi-Permeable, Spiral Wound, Thin Film Composite Cellular Skin layered in several wrappings, to separate and rinse away the dissolved solids to a sewage drain, leaving only the Pure, H20 water molecules for consumption, production, processing, or manufacturing. The TFC Membrane can be used on Municipal or Well Water with proper pre-filtration. The Proprietary design restricts the consumer to only one choice of filter cartridge selection and one distribution entity when replacing expired or exhausted membranes, which typically imposes a higher retail price by forcing the consumer to purchase a Membrane Vessel with Check Valve and Flow Restrictor, in addition to the Membrane Filter with every Membrane replacement. Typical Rejection of minerals and impurities for the TFC Membrane is 95%-99% removal, compared to 70%-80% for the CTA Membrane.

Recommended Service Interval on Most Water Supplies: 3 years

►.001 mic. size for Removal of Salts, Hardness, Minerals, & Metals
►Up To 2000 PPM and 99% Rejection of Total Dissolved Solids
►Up To 150 gallons per day of Purified Water Production

MEM15TFCPTQ (15-18 gpd), MEM35TFCPTQ (35 gpd), MEM50TFCPTQ (50 gpd) -  Substitute Membrane Filter for PuROTwist Part # TQ56-15FC (15-18 gpd), TQ56-35FC (35 gpd), TQ56-50FC (50 gpd)

The CF1MCBPTQ 1 micron filter uses Solid Pressed Molded Carbon Block Technology encapsulated inside of a Proprietary Plastic Housing to reduce or remove Cysts, Bacteria, Chlorine, Ammonia, Chloramines, Hydro-Carbon Gases, VOC’s, Fine Sediments, Silt, and Clay from untreated water. Small granules of Coconut Shell Carbon are Crushed into Powder, Pressed and Bonded together with a “PATENED” heat molding process to form a solid BLOCK of Carbon. The Block Density provides 2-10 times more Volume Weight of Filter Material when compared to other Carbon Filters. This filter provides next to the best protection against VOC’s, Hydro-Carbon Gases, Silt, Clay, Cyst and Bacteria Contaminants when used in Reverse Osmosis Systems, Beverage Dispensers, Ice Machines, Coffee Machines, Distillers, Fountains, Refrigerators, and other appliances. This filter utilizes a Proprietary design which restricts the consumer to only one choice of filter cartridge selection and one distribution entity when replacing expired or exhausted filters, which typically imposes a higher retail price and compromise in quality and performance.

Recommended Service Interval on Most Water Supplies: 3 years

►.001 mic. size for Removal of Salts, Hardness, Minerals, & Metals
►Up To 2000 PPM and 99% Rejection of Total Dissolved Solids
►Up To 150 gallons per day of Purified Water Production

CF1MCBPTQ - Substitute Carbon Post-Filter for PuROTwist Part # Q5620, Q5633, Q5640, Q5621, Q5615